Assembling an MSP

From University of Washington - Ubicomp Research Page
Revision as of 00:30, 18 August 2007 by Karl Koscher (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

To assemble a base MSP:

  1. It not already done, flash an MSB.
  2. If not already done, flash an iMote2.
  3. Solder a battery onto one of the battery terminals on the MSB. Keep the tape on the red wire until you're ready to solder it in to prevent shorts.
  4. Attach the MSB to the iMote2.
  5. Place the MSB/iMote2 combo into an MSP box.
  6. Put the MSP box cover on, and screw it shut.