Attaching a GPS unit to an LSB

From University of Washington - Ubicomp Research Page
Revision as of 21:17, 13 August 2007 by Karl Koscher (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Attach five wires to the LSB as shown. The red wire can be connected to the pad closest to the large connector of either or both of C10 or C11. Cut a GPS cable in half. Splice the wires from the LSB with the GPS wires as shown.

LSB-to-GPS.jpg

Retrieved from "https://ubi.cs.washington.edu/wiki/index.php?title=Attaching_a_GPS_unit_to_an_LSB&oldid=1876"