Attaching a GPS unit to an LSB: Difference between revisions

From University of Washington - Ubicomp Research Page
Jump to navigationJump to search
No edit summary
 
No edit summary
Line 1: Line 1:
This information is specific to the [http://www.usglobalsat.com/item.asp?itemid=125|EM-408 GPS module] we're using, but can be adapted to other GPS modules. <br /><br />
Attach five wires to the LSB as shown. The red wire can be connected to the pad closest to the large connector of either or both of C10 or C11. Cut a GPS cable in half. Splice the wires from the LSB with the GPS wires as shown.  
Attach five wires to the LSB as shown. The red wire can be connected to the pad closest to the large connector of either or both of C10 or C11. Cut a GPS cable in half. Splice the wires from the LSB with the GPS wires as shown.  


[[Image:LSB-to-GPS.jpg]]
[[Image:LSB-to-GPS.jpg]]
<b>GPS Pinout</b>
{| class="wikitable" style="text-align:center"
! Pin !! Description
|-
| 1 || Enable
|-
| 2 || GND
|-
| 3 || RX
|-
| 4 || TX
|-
| 5 || VCC
|}
<b>LSB Pinout</b>
{| class="wikitable" style="text-align:center"
! Pin !! Description
|-
| C10 Pad || VCC
|-
| P2/2 || GND
|-
| P2/3 || RX
|-
| P2/4 || TX
|-
| P2/6 || VCC
|}

Revision as of 21:56, 15 August 2007

This information is specific to the GPS module we're using, but can be adapted to other GPS modules.

Attach five wires to the LSB as shown. The red wire can be connected to the pad closest to the large connector of either or both of C10 or C11. Cut a GPS cable in half. Splice the wires from the LSB with the GPS wires as shown.

LSB-to-GPS.jpg

GPS Pinout

Pin Description
1 Enable
2 GND
3 RX
4 TX
5 VCC

LSB Pinout

Pin Description
C10 Pad VCC
P2/2 GND
P2/3 RX
P2/4 TX
P2/6 VCC
Retrieved from "https://ubi.cs.washington.edu/wiki/index.php?title=Attaching_a_GPS_unit_to_an_LSB&oldid=1885"