Nokia Tips: Difference between revisions

From University of Washington - Ubicomp Research Page
Jump to navigationJump to search
Line 14: Line 14:


* If you don't have a SIM, and the phone beeps are irritating, you can personalize the Offline profile to turn off sounds.
* If you don't have a SIM, and the phone beeps are irritating, you can personalize the Offline profile to turn off sounds.
* You will also need a SIM if you wish to update phone firmware.


== Codes ==
== Codes ==

Revision as of 20:04, 25 April 2007

Go back to Nokia Overview

Tips

  • New applications once installed show up in the "My Own" or "My Installations" folder
  • Make a new ad-hoc network: Tools -> Settings -> Connection -> Access Points -> Options -> New Access Point
  • Manually assigning an IP address to the phone: Tools -> Settings -> Connection -> Access Points -> (Choose your ad-hoc ap) -> Options -> Advanced Settings -> IP4 Phone IP Address
  • You will need to register the phone to the CSE network if you wish to communicate with department machines. Getting the WLAN MAC address requires the codes listed below.
  • If the Nokia phone is running as a Bluetooth client, it has to do a device inquiry, it does not support connecting to a known service on a known device. This is a limitation of the implementation of JavaME on the phones, but should work in Symbian.
  • JavaME apps cannot run as a background process. They can be put into the background through a PushRegistry command that essentially stops them. They can then be restarted via a timer or incoming network process. True background apps can only be done in Symbian.
  • If you don't have a SIM, and the phone beeps are irritating, you can personalize the Offline profile to turn off sounds.
  • You will also need a SIM if you wish to update phone firmware.

Codes

These codes enable you to retrieve information about the phone and perform special functions.

Most Nokia phones support these:

  • *#06# - Displays phone's IMEI (Serial) number.
  • *#0000# - Displays phone's current firmware version.
  • *#2820# - Displays phone's bluetooth MAC address.
  • *#7370# - Resets phone to factory settings. You lose all data. To authorize, use: 12345.
  • *#7780# - Resets the phone to factory settings. You will NOT lose data. To authorize, use: 12345.
  • *#62209526# - Displays your phone’s WLAN MAC address.
  • Phone reset - Turn off phone. Hold # + 3 + Call and turn on phone.

If your phone has a T-Mobile SIM:

  • #999# - Displays the account's balance.
  • #686# - Displays the account's phone number.
  • *TOGO - Customer service.
  • *ADD - Add minutes.
  • 123 - Voicemail.